Electronic Measuring Probes

39 IN (1 m) long flexible silicon insulated wire. Right-angle meter plugs. Comfort-grip over molded probes. Gold plated tips for low contact resistance. Set of 2 leads, one black, one red. Measurement Category IV, 1000V per UL-61010. Maximum current 10 amps. Lifetime Limited Warranty.

A pack of 3 pieces of the i5s current clamps, specially configured to provide low current accuracy while taking measurements on secondary current transformers. This cost-saving 3-pack is perfect for use with 3-phase tools such as the Fluke 434 or Fluke 435.

AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6

Amprobe's new swivel™ clamp meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places. Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Feature rich, measuring AC DC currents,

Amprobe’s new Swivel™ Clamp Meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places. Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Auto and manual ranging respectively for

Automotive Pin And Socket Adapter Set, Color: Red And Black

Current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. May be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.

Current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. May be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

Electronic Test Probe, Length: Upto 100 MM Probe Tip, 1 MR Test Lead, CAT II 1000 V Rated

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

Fluke Current Clamps are the ideal tools to extend the current ranges of Multimeters. Is a single range 200A ac current clamp with current output via safety shrouded banana plugs. Is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.

Fused test probe set for use with 4mm shrouded test leads such as FLUKE TL224. Operating temperature -0 Deg to 40 Deg / max 80 PCT relative humidity.

High Voltage Probe, Model: 80K, Voltage Rating: 0 - 6 KV, Accuracy: DC To 500 HZ: Plus/Minus 1 PCT 500 HZ - 1 KHZ: Plus/Minus 2 PCT Above 1 KHZ: Output Reading Falls Typically -30 PCT At 10 KHZ, Enclosure: Plastic Body, Length: 9.8 IN, Color: Red, Impedance: Input: 75 MOHM (Nominal), Operating Tempe

Insulation Piercing Clip Set, Voltage Rating: 60 VDC, For Use With Fluke TLK281 SureGrip Automotive Test Lead Kit

Is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televis